POWER SPRING 125/120 – BB SmartFlow

POWER SPRING 125/120

The minimum wall thickness is 28-33 cm.

Technical indicators POWER SPRING 125 / 120
Fan speed IN / OUT 1 – 10
Power net (V) 220 – 240
Frequency (Hz) 50
Fan power IN (Wt) 5 – 16
Fan power OUT (Wt) 5 – 16
Heater power (Вт) 0 – 100
Performance (m3/h) 15/25/35/60/80/100/120
Noise level at 3 m distance,               dB(A) 10/12/15/18/25/28/36
Environmental Protection IPX4
RPM. 1100 / 2360
Ambient temperature (°C) -30C … +50°C
Filters EU1
Recovery efficiency ≤ 99%
Energy efficiency class A

Description

The device is designed to provide constant air exchange in the premises.

The device is equipped with a ceramic heat regenerator, which absorbs and accumulates the heat of the air leaving the room and heats the fresh air entering the room, thus ensuring minimal heat loss during the winter season. An electric heater at very low outside temperatures, if necessary, warms the fresh air entering the room to the required temperature and thus reduces energy costs for heating cold outside air and prevents the formation of condensation and moisture in the room and prevents the formation of mold and fungus in the room.

The electric heater works only in the mode when fresh air enters the room from the outside and when the outside temperature is lower than the one set in the HEATER mode.

If necessary and if you wish to save further on your costs, the electric heater can be forced off as described in “HEATER LOCK” – 10, 11, 12

The device is equipped with a ceramic heat regenerator that absorbs and stores the cooled energy of the air leaving the room and cools fresh air entering the room, thus ensuring minimal energy consumption during the hot summer season. The device is designed for continuous operation – 24 hours.

Only with long-term operation and optimal mode will the maximum effect of the device be achieved.

© BB SmartFlow 2023
Modern compact ventilation systems